Explosion proof high-voltage series reactor is mainly used for series connection of 6kV~35kV power system and high-voltage capacitor bank, which can effectively restrain and absorb higher harmonics, limit closing inrush current and switching overvoltage, protect capacitor bank, improve system voltage waveform and improve power factor of power grid
2022/12/02
Complete set of high-voltage shunt capacitor
KGC high-voltage shunt capacitor set is the most widely used reactive power compensation/filtering device at present. It is generally composed of shunt capacitor bank, series reactor, vacuum contactor, disconnector, controller, arrester, discharge coil, protection measurement and other equipment, as shown in the figure. The equipment is mainly used in three-phase AC power systems of 6kV, 10kV, 35kV, 110kV and other voltage levels.
2022/12/02
Complete set of high-voltage shunt capacitor
The high-voltage frame type shunt capacitor device is mainly used in the power frequency three-phase AC power system to improve the power factor of the system, reduce the loss of transformers and lines, improve the voltage quality of the power grid, and improve the utilization rate of equipment. The high-voltage frame type shunt capacitor device mainly includes the following equipment: high-voltage shunt capacitor, series reactor, discharge coil, zinc oxide arrester, isolating grounding switch, frame, bus, connecting wire, post insulator, cabinet or fence, etc.
2022/12/02
High voltage static var generator SVG complete equipment
The basic principle of Konstanz KS series high-voltage static reactive power generator is to connect the self commutating bridge circuit in parallel to the power grid through the reactor, properly adjust the phase and amplitude of the output voltage on the AC side of the bridge circuit, or directly control the current on the AC side of the bridge circuit, so that the circuit can absorb or send reactive current that meets the requirements, and achieve the purpose of dynamic reactive power compensation.
2022/12/02
Complete set of low-voltage capacitor
KSVG-TSC series low-voltage capacitor complete set consists of low-voltage capacitor bank and switch, low-voltage tuning reactor, power factor controller, etc., which are connected in parallel in the AC three-phase power system of 1kV and below to improve power factor, adjust network voltage, control harmonic pollution, and reduce line loss. Its working principle and main components are shown in the figure.
2022/12/02
Complete set of low-voltage static var generator
KSVG-SVG series static var generator can compensate the fundamental reactive current, and also can dynamically and timely compensate the harmonic current. The main circuit mainly includes control system, IGBT power converter and filter reactor. SVG first conducts soft start through soft start contactor and soft start resistance, and then increases the capacitor voltage to the rated value through PWM modulation. The DSP controller extracts all harmonic or reactive currents, enabling SVG to absorb or send reactive current that meets the demand, so as to achieve continuous and stepless dynamic reactive compensation.
2022/12/02